BYD Han — Household Portable AC Charging

4-1 Charging/Discharging Instructions 129 Warning Never drop the equipment or move it by pulling it directly by its cable. When moving the equipment, handle it with care. It is strictly prohibited to modify, disassemble, or repair the charging equipment and its ports. It is not recommended to use any additional wire or adapter/ connector. If an additional adapter is required, choose a suitable cable diameter (≥1.5 mmІ) and the adapter/connector parameters must meet requirements. Never use the charging equipment if the household power strip cable becomes soft, the charging connector cable is worn out, the insulation layer is cracked, or in case of any other damage.

Never use the equipment when the charging connector, power plug, or power strip is disconnected, broken, or any sign of surface damage. 4 Tip Using and Driving It is recommended to contact a BYD authorized dealer or service provider or local electrician to select an appropriate power supply according to requirements of the charging device. Grounding instructions for the charging device: The device must be well grounded, and if the charging device fails or is damaged, the ground cable can provide a minimum impedance circuit discharge to reduce the risk of electric shock.

The device is equipped with a ground cable connecting the ground point of the device with that of the power plug, and the power plug must match a properly installed and well-grounded power supply outlet. The charging cable cannot be placed in a spiral during charging, as this will affect heat dissipation. See the charging instructions for specific charging precautions. 2. Charging Unlock the vehicle and open the charge port hatch.