BYD Han — Electric Lock Control of the Charge Port

138 4-1 Charging/Discharging Instructions anti-theft function is disabled by default. To enable the function, go to the operation page by tapping (infotainment system) → New energy → ChargeSettings, and then tap "Activate". When the function is enabled, unlock the vehicle and unplug the charging connector during charging in the following ways: Press the unlock button on the smart key to unlock. Press the microswitch next to the exterior handle of the driver’s side door to unlock. Press the center console lock under the window in the driver’s side door to unlock.

As shown in the table below, if the vehicle is in state 2/3/4, apart from the above-mentioned unlocking operations, you can unlock and pull out the charging connector by pressing its button. However, this may affect the service life of the charge port or charging connector. This is an emergency action that is not recommended to take frequently. Note Unplug the charging connector in 30 seconds after unlocking or it will be locked again. When the anti-theft mode is disabled, the electrical lock of the charge port automatically releases once the charging is stopped. No. Electric Lock Anti- theft Mode Status Vehicle Door Anti-theft Lock Status Can the Charg- ing Connector Be Removed?

1 Enabled Locking No 2 Enabled Enabled Yes 3 Disabled Locking Yes 4 Disabled Enabled Yes