BYD Han — Energy Settings for Vehicle Driving

4-4 Starting and Driving 157 Remote Start Function* Before starting 1. The power mode is "OFF". 2. The gearshift lever is on "P". 3. The vehicle speed is below 5 km/h. "Remote Start" with the Electronic Smart Key 1. Press and hold the remote start/ stop button on the electronic smart key for 2 seconds to start the vehicle. After it is started, turn signals flash three times. 2. If there is no valid operation within 10 minutes after remote start, the vehicle stops and powers off, and turn signals flash twice. 4 Using and Driving 3. Press and hold the remote start/ stop button on the electronic smart key for 2 seconds. The vehicle stops and powers off, and turn signals flash twice.

Driving During the driving, energy is recovered through regenerative brakes when the vehicle decelerates. For higher efficiency, do not accelerate or decelerate the vehicle unnecessarily. To set the energy regeneration intensity, go to (infotainment system) → New Energy → Energy Management.