BYD Han — Gear Shift Operation

160 4-4 Starting and Driving Gear Shift Controls The gear position of the gear actuator is marked on the gearshift lever as shown on the right. "P": Parking. Press this button to park the vehicle. Shift to this position when turning the motor on or off. To start the vehicle, the power status should be on "OK". Depress the brake pedal, press the UNLOCK button ① , and toggle the gearshift lever to switch from "P" to another position. Note The "P" gear button must only be pressed after the vehicle has come to a complete stop. "R": Reversing gear. It can only be used when the vehicle has come to a complete stop. "N": Neutral gear, used for temporary stop.

The Parking gear must be engaged whenever the driver leaves the vehicle. "D": Drive gear, used for normal driving. Before shifting into "D", ensure that the power switch is on "OK" Shifting out of "P" or to "D" gear requires pressing the brake pedal and the UNLOCK button at the same time. For details, see the prompt message on the instrument cluster. If the shift is successful, the lever returns to its middle position after it is released.