BYD Han — AVH Switch

166 4-4 Starting and Driving Automatic Vehicle Hold (AVH) TheAuto Vehicle Hold(AVH)takes place when the vehicle needs to be stationary for longer periods of time, such as in traffic jams on a slope, or waiting at traffic lights. The AVH function is enabled when the brake pedal is depressed to stop the vehicle. Press the AVH switch to enable AVH. A white indicator for AVH standby is displayed on the instrument cluster, and it turns green when AVH can be enabled. Press the AVH switch again to disable AVH.

Note Depressing the accelerator pedal, switching to the "P" gear, or engaging the EPB will make the vehicle exit AVH mode and return to the AVH standby status; even if the AVH standby status conditions are not met, the vehicle will also exit AVH mode. Preconditions for AVH Standby (All Must Be Met) AVH switch is turned on and the white AVH standby indicator is displayed on the cluster. The driver seat belt is fastened and the doors are closed. The vehicle drive motor is started or the power status is on "OK". Both ESC and EPB systems are normally.