BYD Han — Adaptive Cruise Control (ACC) System

176 4-5 Driving Assistance Functions controlled by the driver. In addition, detection may also be affected or delayed by noise or electromagnetic interference. ACC cannot target vehicles with too small contact ratio, so the driver must keep control of the vehicle. When the vehicle stops as it follows a vehicle ahead, in rare cases, the system does not recognize the end of the vehicle ahead but the lower end of the target (for example, the rear axle of a truck with a high chassis or a vehicle bumper). In such cases, the system cannot ensure proper stop distance, so the driver must stay alert and be ready to brake.

If ACC is activated with the vehicle stationary, the system identifies any stationary obstacle ahead and keeps the vehicle still to ensure a safe startup and prevent collision. However, this function does not cover all obstacles, so the driver must be alert. Changing the vehicle structure, such as lowering the chassis or changing the front license mounting plate, may affect the ACC system. Do not use the ACC system when visibility is poor, or when driving on slopes, winding roads, or wet roads (covered in ice/snow or flooded).

In any of the following situations, it is recommended to go to a BYD authorized dealer or service provider for professional calibration and verification of the radar and multifunctional video controller: Removal of radar, front bumper, or front windshield; Four-wheel alignment has been carried out. The vehicle experienced a collision. ACC system performance decline or system error notified by instrument cluster. Warning ACC only serves as a driving assistance function, so the driver must be fully responsible for driving safety. Influence of weather, road conditions, and other factors may cause ACC to fail. Use ACC based on your needs, traffic, and road conditions.