178 4-5 Driving Assistance Functions The ESC system is started, but not activated yet. Vehicle speed is not greater than 125 km/h. Brake pedal is depressed at speed 0; or brake pedal is not depressed at speeds above 0. There is no vehicle network communication failure prompt on the instrument cluster. Two-way lane lines are clear and the vehicle is at the center of the lane. The AEB function is not activated. Usage button on the steering wheel to activate or exit ICC. (By default, when the function is activated, the current speed is set as the cruise speed.
If the current speed is below 30 km/h, the cruise speed is set to 30 km/h.) Press the For how to set the cruise control speed and vehicle distance, see descriptions for the ACC function. To turn ICC on or off, go to infotainment system and tap DiPilot → Advanced Driving Assist. (If the soft switch is turned on, ICC can be disabled only when the vehicle is in P gear.) When the vehicle is just started up, ICC status before the last power-off is maintained. Precautions Given that the ICC system integrates ACC and LCC, precautions on ACC must be followed in the use of ICC. When ICC is turned on and activated at vehicle speeds between 0 km/h and 125 km/h:
If there is no lane lines ahead, transverse ICC control is suppressed and only ACC works. In that case, ICC working status indicator turns gray on the instrument cluster.