188 4-5 Driving Assistance Functions In case there is a collision or the camera sensor has been reassembled, it is recommended to go to a BYD authorized dealer or service provider for sensor calibration so as to avoid affecting system performance. Warning TSR only serves as a driving assistance function, so the driver must be fully responsible for driving safety. Influence of weather, road conditions, and other factors may cause TSR to fail or lead to late alarms. Use TSR based on your needs, traffic, and road conditions. Intelligent Speed Limit Control (ISLC)* The intelligent Speed Limit Control (ISLC) system integrates ACC and TSR.
With the system enabled, if the vehicle travels faster than the detected speed limit, a confirmation prompt is displayed asking whether to set cruise speed to that limit. After the driver confirms, the system will automatically set cruise speed to the limit to prevent speeding. This function is available at the 30~150 km/h (20~95 mph) speed range. Usage To enable or disable ISLC, go to infotainment system and tap DiPilot → Driving Assist → TSR → ISLC switch. When the TSR system is disabled, the ISLC switch is grayed out and unusable. ISLC is turned off at this time. The ISLC switch will be usable after the TSR system is enabled again. ISLC can be activated provided that ACC is active.