BYD Han — Intelligent High Beam (HMA)*

190 4-5 Driving Assistance Functions With the function enabled, when the light switch is on "Auto", the light meets conditions, and vehicle speed exceeds 35 km/h, a icon is displayed on the instrument cluster. HMA failure: HMA has failed. A icon is displayed on the cluster at this time. Usage To enable or disable HMA, go to infotainment system, and tap DiPilot → Driving Assist. The system defaults to the previous settings when the vehicle starts. With the function enabled, when the light switch is on "Auto", the light meets conditions and vehicle speed exceeds 35 km/h, the system automatically switches between low and high beams based on the current driving environment.

Precautions The HMA system is an auxiliary light control function. While it is recommended to use the system at high vehicle speeds, the system cannot completely replace the driver. The driver must observe road regulations and actively switch between high and low beams according to road condition changes at all times. HMA system exits when fog lights are turned off, wipers are set to high-speed mode, the vehicle is backing up, light switch is not on "Auto", and the environment has too much lighting. Even when HMA is working, the driver must respond to possible situations where the HMA is triggered in error or fails to work due to unavoidable environmental factors and conditions.

Typical situations are: The weather, such as fog, rain or snow, is extremely terrible for driving. The driver’s stick operation to switch to the high beam is prioritized.