210 4-5 Driving Assistance Functions There is dirt, water or fog on the sensor. There is snow or frost on the sensor. The sensor is masked in any way. The vehicle leans significantly to one side or is overloaded. The vehicle is moving on particularly bumpy roads, slopes, gravel or grass. The sensor has been repainted. The vicinity is noisy due to honking of vehicles, motorcycle engines, air brakes of large vehicles, or other noises that produce ultrasonic waves. There's another vehicle with parking assist system nearby. The vehicle is fitted with a towing lug. The bumper or the sensor was hit hard. The vehicle is approaching a high or zigzag curb.
The vehicle is driving in the sun or in the cold. The vehicle is fitted with non-original, lower suspension. Except as described above, sensors may not be able to correctly determine the actual distance due to the shape of the object. The shape and material of obstacles may prevent sensors from detecting them, especially the following:
Electric wires, fences, and ropes; Cotton, snow, and other materials that absorb radio waves; Any object with sharp edges and corners; Low obstacles; High obstacles facing outwards towards the vehicle; Any object under the bumper; Any object too near the vehicle; If an image is displayed on the infotainment screen* or there is a beep, it may be that the sensor detects an obstacle or is interfered. If the Persons near the vehicle (depending on the type of clothing).