BYD Han — Functional Definition

5-1 A/C System 227 Tip It is normal that there may be a damp and moldy smell just after the A/C is turned on. During the operation of the automobile A/C, A/C condensation often remain in the evaporator, and the wet evaporator can easily absorb unfiltered body sweat, smokes, etc., inside the vehicle. Condensation not blown dry makes the dark and damp evaporator surface prone to mold, which is very likely to produce unpleasant odors by long-term fermentation. How to prevent A/C odors: Turn off the A/C and ventilate with natural air before parking to keep the air inside the vehicle relatively dry. Inspect, clean, or replace the filter regularly. Try to keep the cabin clean and fresh.

If the odor persists after odor prevention methods are used, it is recommended to contact a BYD authorized dealer or service provider for repair. In the front defrost mode, button operations on the rear control panel are invalid. In order to reduce odors from the A/C, if the A/C is already turned on, the A/C blower may keep running for a while after the vehicle is powered off and locked. That is because the condensed water on the surface of the evaporator needs to be dried to prevent mold fermentation. It is normal for the A/C blower to start running automatically when the vehicle is locked. Do not worry about it.

5 In-Vehicle Devices Auto mode button After tapping this button, its indicator lights up on the front A/C panel, and compressor status, and air amount and blowing modes can be adjusted automatically. The vehicle exits AUTO control if air amount and blowing modes are set, and other functions remain in AUTO mode except for those that have been operated. A/C power button