BYD Han — Vents

5-1 A/C System 231 In heating mode, press the compressor control button to light up the button (turning on the compressor), which can reduce airflow moisture. In ventilation mode, the system introduces the natural wind from outside, which is suitable for spring and autumn. Tip A/C unpleasant smell: It is normal that there may be a damp and moldy smell just after the A/C is turned on. That is due to condensation that remains in the evaporator and is not blown dry. How to prevent it: Turn off the A/C and enable natural ventilation before parking to keep the air inside the vehicle relatively dry. Check, clean or replace the air filter regularly. Keep the cabin clean.

If the unpleasant smell persists, contact a BYD authorized dealer or service provider for repair. 5 It is normal that the A/C blower keeps running after the vehicle is locked. That is because the condensed water on the surface of the evaporator needs to be dried to prevent mold fermentation. In-Vehicle Devices A/C Vents Side vent ① Toggle the vent stick to adjust the outlet angle of air flow. ② Turn the roller to adjust the size of the vent or to open/close the vent.