302 7-1 When Faults Occur Jacking up the vehicle 5. After confirming that the vehicle has no passenger onboard, jack up the vehicle to a height allowing for spare tire installation. Installing a spare tire requires more distance from the ground than removing a deflated one. When lifting the vehicle, insert the rocker wrench into the jack and rotate it clockwise. When the jack is in contact with the vehicle and begins to lift the vehicle, verify again that the jack is in the correct position. Warning When the jack is in contact with the vehicle and begins to lift the vehicle, verify again that the jack is in the correct position. Replacing wheels 6. Remove lug nuts and replace the tire.
Roll the spare tire to the mounting position, with the bolts aligned with the wheel holes. Then hold up the wheel until the top bolt passes through the screw hole. Rotate the tire and push it back until all other bolts pass through the holes. Before installing the wheel, remove corrosion from the mounting surface with a wire brush or the like.