304 7-1 When Faults Occur Tighten the nuts a bit and alternatively in the sequence shown. Repeat the action until the lug nuts are torqued to the specification. Note Before lowering the vehicle, make sure that no part of your body and no person in the vicinity of the vehicle will be injured by the vehicle’s descent. Lug nuts must be torqued to 130 N•m after wheel replacement. Otherwise, loose nuts would cause the wheel to come off, causing serious accidents. After wheel replacement 9. Check the pressure of the replacement tire. Adjust the tire pressure to the specification.
If the pressure is lower than the specification, slowly drive to a nearby service station to inflate the tire to the correct pressure value. Be sure to mount the tire valve cap; otherwise dust and moisture will enter the valve stem and cause air leakage. If the valve cap is lost, use a new one as soon as possible. 10. Properly store all tools and the flat tire. Have the flat tire repaired by a technician. Tip Before driving, verify that all tools and flat tires are kept in a storage area to reduce the possibility of personal injury in case of collision or emergency braking.