2-1 Instrument Cluster 57 Instrument cluster view in simple mode 2 Note Instrument Cluster During occasional communication delays in the instrument cluster system, for safe driving, the instrument cluster may automatically switch to simple mode. In this mode, the cluster continues to display driving related information normally, without affecting normal vehicle travel. After the system becomes normal, the cluster may automatically exit the simple mode. If it does not, try the following actions to switch back to normal mode: 1. Press and hold the roller button on auxiliary dashboard for 3 seconds to restart the instrument cluster information display system; 2.
While vehicle safety is ensured, operate the vehicle power switch to turn off the vehicle and then switch back to the OK position. If the instrument cluster remains in simple mode after those actions have been taken, promptly contact a BYD authorized dealer or service provider for inspection. The image of the instrument cluster view is for reference only and is subject to actual factory configuration.