62 2-1 Instrument Cluster ESC fault warning light When the ignition switch is on OK, this warning light goes on. If electronic stability control (ESC) is functioning properly, this warning light goes off after a few seconds. If the system fails, this warning light goes on again until the system fault is resolved. When the ESC fault warning light flashes while the vehicle is in motion, it indicates the ESC system is working. When the ESC fault warning light is on (with the ABS fault warning light and the parking system fault warning light off), the ESC control fails, but the ABS and the braking system will still operate normally.
When the ESC fault warning light is on (with the ABS fault warning light and the parking system fault warning light off), since the vehicle stability control system does not operate, the vehicle will be extremely unstable in case of sharp turns or when the driver steers away from obstacles ahead. If any of the following cases occurs, it means that there are faults in the components monitored by the warning light system. In such case, it is recommended to contact a BYD authorized dealer or service provider for vehicle inspection as soon as possible. When the ignition switch is on OK, this warning light remains off (with no self-check) upon power-on.
This warning light is steady on while driving. A flashing warning light during the driving indicates that the system is operating normally. Tip A warning light that lights up briefly during operation does not indicate a problem. If the ESC fault warning light remains on while the warning lights for the ABS and the braking system are on, immediately stop the vehicle in a safe place and contact a BYD authorized dealer or service provider. This is because braking at this time can render the vehicle extremely unstable, and the anti-lock braking system does not work at all.