BYD Han — Descriptions for Warning Lights and Indicators

64 2-1 Instrument Cluster Unfastened seat belt warning light With the ignition switch on OK, if any seat belt is not fastened in front and rear seats*, the seat belt indicator will light up. It remains on until the seat belt is fastened. Airbag fault warning light With the ignition switch on OK, this warning light goes on and then off after a few seconds if the airbag system is working properly. This warning light is used to monitor the airbag ECU, collision sensors, inflation device, warning lights, connections, and power supply. If any of the following cases occurs, it means that there are faults in the components monitored by the warning light system.

In such case, it is recommended to contact a BYD authorized dealer or service provider for vehicle inspection as soon as possible. When the ignition switch is on OK, this warning light remains off or on after the vehicle is powered on. This warning light goes on during driving. Parking system fault warning light When the brake fluid level is low and the braking system is faulty, this warning light lights up. If any of the following conditions occurs, immediately park the vehicle in a safe place. It is recommended to contact a BYD authorized dealer or service provider. This warning light goes on when the ignition switch is on OK and the brake fluid level is low.

Tip When the brake fluid level is low, park the vehicle because it is dangerous to continue driving. After starting the vehicle, if the brake fluid level is normal, and the EPB system is operating normally (the EPB switch is pulled up