3-4 Switches 99 Light Switches Turn the knob at the end of the light switch to " ", and all lights except for daytime running lights turn off. The daytime running light in that mode is on when the daytime light feature on the pad is enabled and is off when the daytime light feature on the pad is disabled. Auto lights Turn the knob at the end of the light switch to " ". The BCM captures the brightness data from the light intensity sensor to automatically turn the position lights and low beam on or off. 3 Controller Operation Tip The light intensity sensor is located on the top of the windshield. Do not block the sensor or let anything splash on it.
Position lights Turn the knob at the end of the light switch to " " to turn on position lights.