WARNING! • Where applicable to use a top tether strap with the child restraint system, ensure the strap is routed through the hole in the headrest before attaching and tensioning the strap to the anchorage point at the base of the seat. • Never use a rear-facing child seat on the front passenger seat with the airbag activated. • Front-facing passengers (children or adults) must never sit on the front passenger seat with the passenger airbag deactivated. • When a forward facing child restraint system is used on the front passenger seat, make sure the seat is positioned fully rearward away from the active airbag.
• Before seating a child, ensure the child restraint system is securely installed and does not rotate or move away from the seat. CAUTION! • When using a child restraint system always ensure: the anchorages are not obstructed; the seat belt is in the correct position; and the child restraint system is securely installed. •use images to demonstrate routing of the top tether. • For details about how to install the CRS on the front passenger seat, see the preceding description. • Failure to follow the advice given, or to follow the instructions from the child restraint system manufacturer, can endanger life or lead to serious personal injury.
Securing a child seat using the seat belt Securing a child seat using the seat belt • Only use child seats that are recommended by BYD, are universally approved, or are semi-universal and where the vehicle model is included on the child restraint manufacturer's vehicle list. CAUTION! •Extension straps may be required to connect the top tether to the anchorage, if the top tether length is insufficient. • Installation options are shown in the table below. • When installing a size class R3 child restraint system, ensure the seat is fully rearward before the installation. 28