Data Collection and Processing • This data is not usually stored, but there are control units, sensors or other components installed in the vehicle that record such data, for example to record maintenance requirements, error messages or other information. Data Collection and Processing • The in-vehicle data will only be stored in the equipment in the vehicle but can be read out via the legally required OBD ("On Board Diagnostics") interface, for example by BYD authorised dealer or service provider or other third parties. • This section provides you with some important information on how personal data is collected and processed when you use a BYD vehicle.
• In case this access takes place during vehicle maintenance, the information can also be transmitted to BYD engineers for quality assurance, product defect reports or customer claim verification. • For a more detailed overview on data processing, data protection and data subject rights, please read the current version of the privacy policy for the vehicle available at the BYD website. Remote-services-related data Remote-services-related data Vehicle Data Processing Remote monitoring services • Data is collected when the vehicle is used, such as data collected or transmitted by vehicle sensors or control units, which is necessary for the safe functioning of your vehicle.
• This vehicle has remote monitoring services. • These include remote monitoring services such as remote diagnosis and Over-the-air (OTA) updates and upgrades for security and safety purposes (subject to owner's approval). • In some cases, the data is used to support driving (driver assistance systems) or to enable a specific comfort or infotainment function. • These monitoring services serve the following purposes: service provision (remote support/diagnostics), product development and security/public safety. • Personal data that is collected and processed mainly include in-vehicle data, remote-services-related data, and other data, as further specified below.
• Depending on the country and set- up, various vehicle information can be transmitted to BYD for the above purposes, including vehicle location information, vehicle status, such as energy consumption, vehicle speed, gear position, power mode, ESC status, steering system status, battery status, powertrain status and overall vehicle performance status. In-Vehicle Data In-Vehicle Data Operation data • When the vehicle is used, various vehicle status data (e.g. speed, battery level, braking system) or the environment (e.g. distance sensors, rain sensor, temperature sensors) are collected and processed. 32