Super Micro PDSG4/PDSGE User & Service Manual PDF (EN)

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent. IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product. FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. California Best Management Practices Regulations for Perchlorate Materials:

This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”. WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Manual Revision 1.1a Release Date: February 25, 2009 Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document. Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2009 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America

Стр. 2

Preface Preface About This Manual This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the PDSG4/PDSGE motherboard. The PDSG4/PDSGE supports single Intel Pentium D (Dual-Core)/Pentium 4 Extreme Edition/Pentium 4/Pentium Extreme Edition/Celeron D LGA (Land Grid Array) 775 Processors at system bus speeds of 1066 MHz/800 MHz/533 MHz. The LGA 775 Pentium D/Pentium 4/Celeron . D Processor is housed in a Flip-Chip Land Grid Array (FC-LGA4) package that interfaces with the motherboard via an LGA775 socket.

The PDSG4/PDSGE supports the Intel Hyper-Threading (HT) Technology, the EM64T Technology, the Enhanced Intel SpeedStep Technology (EIST) and the Matrix Storage Technology. Please refer to the motherboard specifi cations pages on our web site (http:// www.supermicro.com/Product) for updates or visit Intel's web site for processor support. This product is intended to be professionally installed and serviced by a technician. Manual Organization Chapter 1 describes the features, specifi cations and performance of the PDSG4/ PDSGE mainboard and provides detailed information about the chipset. Chapter 2 provides hardware installation instructions.

Read this chapter when installing the processor, memory modules and other hardware components into the system. If you encounter any problems, see Chapter 3 , which describes troubleshooting procedures for the video, the memory and the system setup stored in CMOS. Chapter 4 includes an introduction to BIOS and provides detailed information on running the CMOS Setup utility. Appendix A provides BIOS POST Messages. Appendix B lists BIOS POST Codes. Appendix C lists Software Installation Instructions. Conventions used in this Manual Special attention should be given to the following symbols for proper installation and to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastro phic system failure or to avoid bodily injury. Warning: Important information given to ensure proper system installa- tion or to prevent damage to the components. iii

Стр. 3

PDSG4/PDSGE User’s Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Manual Convention ..................................................................................................... iii Chapter 1: Introduction 1-1 Overview ......................................................................................................... 1-1 Checklist .....................................................................................................

1-1 Contacting Supermicro ............................................................................... 1-2 PDSG4/PDSGE Image .............................................................. 1-3 PDSG4 Layout ............................................................................ 1-4 PDSG4 Quick Reference............................................................. 1-5 PDSGE Layout ........................................................................... 1-6 Motherboard Features .............................................................................. 1-8 Intel 955X (Glenwood) Chipset: System Block Diagram .........................

1-10 PDSGE Quick Reference ............................................................ 1-7 1-2 Chipset Overview ......................................................................................... 1-11 1-3 PC Health Monitoring ................................................................................... 1-12 1-4 Power Confi guration Settings ....................................................................... 1-12 1-5 Power Supply .................................................................................................. 1-13 1-6 Super I/O ........................................................................................................ 1-14 Chapter 2:

Installation 2-1 Static-Sensitive Devices ................................................................................. 2-1 2-2 Processor and Heatsink Installation ............................................................... 2-2 2-3 Mounting the Motherboard in the Chassis ..................................................... 2-5 2-4 Installing DDR 2 Memory ............................................................................... 2-6 2-5 I/O Port/Front Control Panel Connector Locations ........................................ 2-7 2-6 Connecting Cables .........................................................................................

2-8 Power Supply Connectors ...................................................................... 2-8 Power LED ................................................................................................ 2-9 NMI Button ............................................................................................... 2-9 HDD LED .............................................................................................. 2-10 NIC1 LED Indicator .................................................................................. 2-10 OH/Fan Fail LED .....................................................................................

2-11 Reset Button ..............................................................................................2-11 Power Button ............................................................................................ 2-12 Chassis Intrusion ...................................................................................... 2-12 iv

Стр. 4

Table of Contents Serial Ports .............................................................................................. 2-13 CD Header/Audio Header ...................................................................... 2-13 Universal Serial Bus (USB) ..................................................................... 2-14 G-LAN (Ethernet) Port .............................................................................. 2-15 PS2 Keyboard/Mouse .............................................................................. 2-15 Fan Headers ...........................................................................................

2-16 Wake-On-Ring .......................................................................................... 2-17 Power LED ............................................................................................... 2-18 Wake-On-LAN .......................................................................................... 2-17 FP Audio ................................................................................................... 2-18 2-7 Jumper Settings ............................................................................................ 2-19 Explanation of Jumpers .........................................................................

2-19 GLAN Enable/Disable .............................................................................. 2-19 CMOS Clear ........................................................................................... 2-20 Watch Dog Enable ................................................................................... 2-20 USB Wake-Up .......................................................................................... 2-21 SMB to PCE-X/PCI-E Slots ...................................................................... 2-22 Keyboard Wake-Up ..................................................................................

2-22 SCSI Enable ............................................................................................. 2-23 SCSI Termination Enable ......................................................................... 2-23 2-8 LED Indicators .............................................................................................. 2-24 G-LAN LEDs ................................................................................................... 2-24 2-9 Parallel Port, Floppy/Hard Drive and Audio Connections ............................ 2-25 Floppy Connector ..........................................................................................

2-26 Parallel Port Connector ................................................................................. 2-25 IDE Connector ............................................................................................... 2-27 SCSI Connectors ............................................................................................ 2-28 Chapter 3: Troubleshooting 3-1 Troubleshooting Procedures ........................................................................... 3-1 Before Power On ....................................................................................... 3-1 No Power ...................................................................................................

3-1 No Video .................................................................................................. 3-1 Memory Errors ........................................................................................... 3-2 Losing the System’s Setup Confi guration ................................................ 3-2 3-2 Technical Support Procedures ........................................................................ 3-2 3-3 Frequently Asked Questions ........................................................................... 3-3 3-4 Returning Merchandise for Service ................................................................. 3-5 v

Стр. 5