Chapter 2: Installation 3. Locate Pin 1 on the CPU socket. (*Note: Pin 1 is the corner marked with a triangle). Please note that the North Key and the South Key are located vertically in the CPU housing. North Key 4. Position the motherboard in such a way that Pin 1 of the CPU socket is located at the left bottom of the CPU housing. Pin 1 South Key 5. Use your thumb and your index finger to hold the CPU at the North Center Edge and the South Center Edge of the CPU. North Center Edge 6. Align Pin 1 of the CPU with Pin 1 of the socket. Once aligned, carefully lower the CPU straight down to the socket. (**Do not drop the CPU on the socket. Do not move the CPU horizontally or vertically.
Do not rub the CPU against the surface or against any pins of the socket to avoid damage to the CPU or the socket.) South Center Edge 7. With the CPU inside the socket, inspect the four corners of the CPU to make sure that the CPU is properly installed. Socket Lever 8. Use your thumb to gently push the lever down and lock it in the hook. 9. If the CPU is properly installed into the socket, the plastic cap will be automatically released from the load plate when the lever is pushed into the hook. Remove the plastic cap from the motherboard. CPU in the CPU socket (*Warning: Please keep the plastic cap.
The motherboard and the CPU must be shipped with the plastic cap prop- erly installed to protect the CPU pins. Ship- ment without the CPU plastic cap properly installed will void the warranty.) ! Plastic cap is released from the load plate if CPU properly installed. 2-3