Chapter 2: Installation Universal Serial Bus (USB) Two Universal Serial Bus ports (USB 1/2) are located at (J15) on the I/O back panel. Additional four USB ports (USB 3/4, USB 5/6) located are at J46 and J45 on the motherboard. These ports can be used to provide front side chassis access (cables not included). See the tables on the right for pin definitions. GLAN (Giga-bit Ethernet Ports) Two G-bit Ethernet ports (GLAN) are located next to the VGA port on the IO backplane. This port accepts RJ45 type cables. A JPG1 (CPUFan) Fan6 DIMM 1A Intel 3000 A. USB 1/2 B. GLAN1 North Bridge B CPU LGA 775 Intel 3010 OR Fan2 C. GLAN2 D. FP USB3/4 Fan5 C JLED Fan3 L R T C P F E.
FP USB5/6 CTRL LAN1 PCI-X 64-bit 133 MHz PCI-Exp.
x8 JI2C1 JI2C2 JPF JWD IPMI 2.0 LAN2 PCI 32-bit 33 MHz PCI 32-bit 33 MHz PXH-V CTRL JPL1 JPL2 PCI 32-bit 33 MHz PCI 32-bit 33 MHz L E 3 L E 4 ICH7R PCI 32-bit 33 MHz Printer SPKR JBT1 USB3/4 USB5/6 JP3 E D South Bridge LE1 SATA0 SATA1 SATA3 COM2 Floppy J9 WOL JWOR JL1 2-15 Back Panel USB (USB 1/2) Pin# Definitions 1 +5V 2 PO- 3 PO+ 4 Ground 5 N/A Front Panel USB Pin Definitions (USB 3/4/5/6) USB 3/5 USB 4/6 Pin # Definition Pin # Definition 1 +5V 1 +5V 2 PO- 2 PO- 3 PO+ 3 PO+ 4 Ground 4 Ground 5 Key 5 No connection KB/MS USB 1/2 VGA COM1 JLAN1 JLAN2 4 PW 3 PW JPR1 8-pin PWR 2 R PW ATX 4-Pin VGA CTRL DIMM 2B DIMM 1B BIOS 1 *Compact Flash only n4