Super Micro Computer, Inc. PDSMA+ / PDSMA-E+ — Super Micro PDSMA+ / PDSMA-E+ User Manual: Motherboard Guide PDF

PDSMA+/PDSMA-E+ User's Manual There are two IDE Connectors (J3: Blue, J4: White) on the motherboard. The blue IDE connector (J3) is desig- nated as the Primary IDE Drive. The white IDE connector (J4) is designated as the Secondary IDE Drive, reserved for Compact Flash Card use only. (See the note below.) See the table on the right for pin definitions. IDE Connectors Note : J4 (the white slot) is reserved for Compact Flash Card only. Do not use it for other devices. If J4 is populated with a Compact Flash Card, J3 (the blue slot) will be available for one device only. For the Compact Flash Card to work properly, you will need to connect a power cable to JWF1 first.

USB 1/2 KB/MS COM1 JPG1 (CPUFan) Fan6 DIMM 1A VGA JLAN1 North Bridge CPU Intel 3010 OR Intel 3000 Fan2 A. IDE#1 B. Compact Flash JLAN2 LGA 775 L R T C P F LAN1 Fan5 PCI-Exp.

x8 JPF JWD IPMI 2.0 JLED Fan3 S A+/PDSMA-E+ M S D P R E P U CTRL PCI-X 64-bit 133 MHz PCI 32-bit 33 MHz JI2C1 JI2C2 PXH-V A B LAN2 CTRL JPL1 JPL2 PCI 32-bit 33 MHz PCI 32-bit 33 MHz ® S I/O PCI 32-bit 33 MHz Printer L E 3 L E 4 South Bridge ICH7R COM2 Floppy PCI 32-bit 33 MHz J9 WOL SPKR JBT1 USB3/4 USB5/6 JP3 JWOR JL1 LE1 SATA0 SATA1 SATA3 2-30 IDE Drive Connectors Pin Definitions (IDE) Pin# Definition Pin # Definition 1 Reset IDE 2 Ground 3 Host Data 7 4 Host Data 8 5 Host Data 6 6 Host Data 9 7 Host Data 5 8 Host Data 10 9 Host Data 4 10 Host Data 11 11 Host Data 3 12 Host Data 12 13 Host Data 2 14 Host Data 13 15 Host Data 1 16 Host Data 14 17 Host Data 0 18 Host Data 15 19 Ground 20 Key 21 DRQ3 22 Ground 23 I/O Write 24 Ground 25 I/O Read 26 Ground 27 IOCHRDY 28 BALE 29 DACK3 30 Ground 31 IRQ14 32 IOCS16 33 Addr1 34 Ground 35 Addr0 36 Addr2 37 Chip Select 0 38 Chip Select 1 39 Activity 40 Ground 4 PW 3 PW JPR1 8-pin PWR 2 R PW ATX 4-Pin VGA CTRL DIMM 2B DIMM 1B Fan1 BIOS 1 *Compact Flash only n4 Primary IDE