PDSMA+/PDSMA-E+ User's Manual Parallel ATA This setting allows the user to enable/disable the function of Parallel ATA and configure Parallel ATA settings. The options are Disabled and Enabled . Serial ATA This setting allows the user to enable or disable the function of Serial ATA. The options are Disabled and Enabled. Native Mode Operation This setting allows the user to set the native mode for ATA. The options are: Serial ATA and Auto . SATA Controller Mode Select Compatible to allow the SATA and PATA drives to be automatically detected and placed in the Legacy Mode. Select Enhanced to allow the SATA and PATA drives to be automatically detected and placed in the Native IDE Mode. ( *Note:
The Enhanced mode is supported by the Windows 2000 OS or a later version.) When the SATA Controller Mode is set to Enhanced, the following items will display: Serial ATA (SATA) RAID Enable Select Enable to enable Serial ATA RAID Functions. (*For the Windows OS environment, use the RAID driver if this feature is set to Enabled. When this item is set to Enabled, the item: "ICH RAID Code Base" will be available for you to select Intel or Adaptec Host RAID firmware to be activated. If this item is set to Disabled , the item-SATA AHCI Enable will be available.) The options are Enabled and Disabled .
SATA AHCI (*Available when SATA RAID is Disabled.) Select Enable to enable the function of Serial ATA Advanced Host Interface. (*Take caution when using this function. This feature is for advanced programmers only.) The options are Enabled and Disabled . (* Warning: Exercise extreme caution when using this function. This feature is for advanced programmers only.) The options are Enabled and Disabled . ICH RAID Code Base (*Available when SATA RAID is Enabled.) Select Intel to enable Intel's SATA RAID firmware. Select Adaptec to use Adaptec's HostRAID firmware. The options are Intel and Adaptec . 4-4