Super Micro Computer, Inc. PDSMA+ / PDSMA-E+ — Super Micro PDSMA+ / PDSMA-E+ User Manual: Motherboard Guide PDF

Chapter 4: BIOS Advanced Processor Options Access the submenu to make changes to the following settings: CPU Speed This is a display that indicates the speed of the installed processor. Frequency Ratio ( * Available when supported by the CPU.) The feature allows the user to set the internal frequency multiplier for the CPU. The options are: Default and x12. Core-Multi-Processing ( * Available when supported by the CPU.) Set to Enabled to use a processor's Second Core and beyond. (Please refer to Intel's web site for more information.) The options are Disabled and Enabled.

Machine Checking ( * Available when supported by the CPU.) Set to Enabled to use this function which will allow the CPU to detect and report hardware (machine) errors via a set of model-specific registers (MSRs). The options are Disabled and Enabled . Enhanced Intel SpeedStep Support (*Available when supported by the CPU.) Select Enabled to use the Enhanced Intel SpeedStep Technology and allows the system to automatically adjust processor voltage and core frequency in an effort to reduce power consumption and heat dissipation. The options are Enabled and Disabled . Please refer to Intel’s web site for detailed information.

Thermal Management 2 ( * Available when supported by the CPU.) Set to Enabled to use Thermal Management 2 (TM2) which will lower the CPU voltage and frequency when the CPU temperature reaches a predefined overheat threshold. Set to Disabled to use Thermal Manager 1 (TM1), allowing CPU clocking to be regulated via CPU Internal Clock modulation when the CPU temperature reaches the overheat threshold. Adjacent Cache Line Prefetch ( * Available when supported by the CPU.) The CPU fetches the cache line for 64 bytes if this option is set to Disabled. The CPU fetches both cache lines for 128 bytes as comprised if Enabled. The default setting is Enable d.

Set Maximum Extended CPUID=3 Select Enabled to set the Maximum Extended CPUID value to 3. The options are Enabled and Disabled . Echo TPR Select Enabled to send TPR (Transport Protocol) messages on the system bus. The options are Enabled and Disabled . 4-11