Chapter 2: Installation ATX PS/2 Keyboard and PS/2 Mouse Ports The ATX PS/2 keyboard and PS/2 mouse are located next to the Back Panel USB ports on the motherboard. See the table at right for pin defi ni- tions. (Note: NC=No connection.) Speaker Connector The speaker connector is located at J9 and allows you to choose between using the internal or an external speaker. For the internal speaker, short pins 3 and 4. To use an exter- nal speaker, place the speaker cable header on all four pins. See the table on the right. A 24-Pin ATX PWR JPW1 Fan6/CPU Fan 8-pin PWR Fan1 JPW2 A. KB/Mouse E7230 Pentium Dual Core CPU LGA 775 B.
Speaker Connector Mukilteo (North Bridge) DIMM 1B DIMM 1A DIMM 1 DIMM 2A DIMM 2 DIMM 3 JLED FP CTRL DIMM 2B DIMM 4 JF1 SXB -E1 PCI-Ex8 JI 2 C1 Slot6 PCI-X 133 MHz Fan3 Fan2 JPL1 JPL2 Printer 2-15 PS/2 Keyboard and Mouse Port Pin Defi nitions Pin# Defi nition 1 Data 2 NC 3 Ground 4 VCC 5 Clock Speaker Connector (J9) Pin Setting Defi nition Pins 3-4 Internal Speaker Pins 1-4 External Speaker KB/MS J28 USB 1/2 J15 COM1 J31 VGA JG1 GLAN1 GLAN2 JI C2 Battery J PXH-V VGA IPMI CTRL Buzzer L E 3 B ICH7R L E 4 (South Bridge) 1 COM2 J9 ot1PCI 32 Bit/33 MHz JBT1 JWOR USB3/4 USB5/6 E1 JW P F1 SATA3 SATA2 SATA1 SATA0 3 J27 Floppy J4 IDE (*Compact Flash Card only) JL1 L J J3 IDE (Primary) Fan4