Super Micro Computer, Inc. E7230 — Super Micro E7230 Motherboard User's Manual PDF: PDSMi Guide for Integrators & Technicians

Chapter 2: Installation Wake-On-Ring The Wake-On-Ring header (JWOR) is located close to the ICH7 (South Bridge). This function allows your computer to receive an incoming call to the modem and be awakened when in the suspend state. See the table on the right for pin defi nitions. You must have a Wake-On-Ring card and cable to use this feature. Wake-On-LAN The Wake-On-LAN (WOL) header is located close to the SATA 3 port. See the table on the right for pin defi nitions. You must enable the LAN Wake-Up function in the BIOS and also have a LAN card with a Wake- on-LAN connector and cable to use this feature. KB/MS JPW1 A. WOR USB 1/2 J15 J28 24-Pin ATX PWR Fan6/CPU Fan B.

WOL COM1 E7230 J31 Mukilteo JG1 VGA (North Bridge) GLAN1 DIMM 1A DIMM 1 GLAN2 DIMM 2A DIMM 2 JLED Fan5 DIMM 1B DIMM 2B DIMM 3 DIMM 4 FP CTRL LAN SXB -E1 PCI-Ex8 Slot6 PCI-X 133 MHz JF1 Fan3 Fan2 CTRL JI 2 C1 JI 2 C2 Battery JPF JWD S UPER PDSMi REV 1.0 LAN CTRL JPL1 VGA BIOS PXH-V WOL JPL2 IPMI CTRL Buzzer SATA3 B ® S I/O L E 4 L E 3 ICH7R A SATA2 SATA1 JPG1 Slot1 PCI 32 Bit/33 MHz COM2 J9 JBT1 USB3/4 USB5/6 JWF1 (South Bridge) LE1 JWOR JP3 SATA0 J30 J27 IDE J4 J3 IDE (Primary) Printer Floppy (*Compact Flash Card only) JL1 Fan4 2-17 Wake-On-Ring Pin Defi nitions (JWOR) Pin# Defi nition 1 Ground (Black) 2 Wake-up Wake-On-LAN Pin Defi nitions (JWOL) Pin# Defi nition 1 +5V Standby 2 Ground 3 Wake-up JPW2 Pentium Dual Core CPU LGA 775