Super Micro Computer, Inc. E7230 — Super Micro E7230 Motherboard User's Manual PDF: PDSMi Guide for Integrators & Technicians

Chapter 3: Troubleshooting modifi cations to the boot block code. 3. If you've followed the instructions above to troubleshoot your system, and still cannot resolve the problem, then please contact Supermicro's technical support and provide them with the following information: • Motherboard model and PCB revision number • BIOS release date/version (this can be seen on the initial display when your system fi rst boots up) •System confi guration An example of a Technical Support form is on our web site at (http://www.supermicro.com/support/contact.cfm). 4. Distributors: For immediate assistance, please have your account number ready when placing a call to our technical support department.

We can be reached by e-mail at support@supermicro.com, by phone at: (408) 503-8000, option 2, or by fax at (408)503-8019. 3-3 Frequently Asked Questions Question: What type of memory does my motherboard support? two-way interleaved or non-interleaved SDRAM. See Section 2-4 for details on Answer: The PDSMi supports up to 8 GB of unbuffered , ECC, DDR2-677/533/400, installing memory. Question: Why does Microsoft Windows XP (SP2) and Windows Vista show less memory than what is physically installed? Answer: Microsoft implemented a design change in Windows XP with Service Pack 2 (SP2) and Windows Vista.

This change is specifi c to the Physical Address Extension (PAE) mode behavior which improves driver compatibility. For more in- formation, please read the following article at Microsoft’s Knowledge Base website at: http://support.microsoft.com/kb/888137. Question: How do I update my BIOS? Answer: It is recommended that you do not upgrade your BIOS if you are not experiencing any problems with your system. Updated BIOS fi les are located on our web site at http://www.supermicro.com/support/bios/ . Please check our BIOS warning message and the information on how to update your BIOS on our web site. Select your motherboard model and download the BIOS fi le to your computer.

Also, check the current BIOS revision and make sure that it is newer than your BIOS before downloading. You can choose from the zip fi le and the .exe fi le. If you choose the zip BIOS fi le, please unzip the BIOS fi le onto a bootable device or a USB pen. Run the batch fi le using the format fl ash.bat fi lename.rom from your bootable device or USB pen to fl ash the BIOS. Then, your system will automati- 3-3