Super Micro Computer, Inc. E7230 — Super Micro E7230 Motherboard User's Manual PDF: PDSMi Guide for Integrators & Technicians

PDSMi User's Manual Parallel ATA confi gure Parallel ATA settings. The options are Enabled and Disabled. This setting allows the user to enable/disable the function of Parallel ATA and Serial ATA This setting allows the user to enable or disable the function of Serial ATA. The options are Disabled and Enabled. Native Mode Operation Select the native mode for ATA. The options are: Serial ATA and Auto . SATA Controller Mode Select Compatible to allow the SATA and PATA drives to be auto-detected and placed in the Legacy Mode. Select Enhanced to allow the SATA and PATA drives to be auto-detected and placed in the Native IDE Mode. ( *Note:

The Enhanced mode is supported by the Windows 2000 OS or a later version.) When the SATA Controller Mode is set to "Enhanced", the following items will display: Serial ATA (SATA) RAID Select Enable to enable the function of Serial ATA RAID. The options are Enabled and Disabled (*Default). (*For the Windows OS environment, if this feature is set to Enabled, be sure to use the RAID driver. If set to Disabled , use the Non-RAID driver.) (*Note: If this item-SATA RAID is set to Enabled, the next item-"SATA AHCI Enable" will not be available.

If this feature is set to "Enhanced", the following feature will be available:) SATA AHCI Select Enable to enable the function of Serial ATA Advanced Host Interface. Warning: Exercise extreme caution when using this function. This feature is for advanced programmers only. The options are Enabled and Disabled . ICH RAID CodeBase Select Intel to enable Intel's ICH RAID Controller for the Windows OS. Select Adaptec to enable Adaptec's RAID Controller for the Linux OS. The options are Intel and Adaptec. 4-4