Super Micro Computer, Inc. E7230 — Super Micro E7230 Motherboard User's Manual PDF: PDSMi Guide for Integrators & Technicians

PDSMi User's Manual Creating a RAID 0 Volume: The following screen will appear: a. Select "Create RAID Volume" from the main menu and press the key. b. Specify a name for the RAID 0 set and press the key or the key to go to the next fi eld. (You can use the key to select the previous menu.) c. When RAID Level item is highlighted, press the , keys to select RAID 0 (Stripe) and hit . d. When the Disks item is highlighted, press to select the HDD to confi gure as RAID. The following pop-up screen (*See the note on Page C-3) displays: e. Use the , keys to highlight a drive and press to select it. A triangle appears to confi rm the selection of the drive. f.

Use the , keys to selet the stripe size, ranging from 4 KB to 128 KB for the RAID 0 array, and hit . ( *Note : For a server, please use a lower stripe size, and for a multimedia system, use a higher stripe size.The default stripe size is 128 KB.) g. Press when the Create Volume item is highlighted. A warning message displays. h. When asked "Are you sure you want to create this volume (Y/N), press "Y" to create the RAID volume, or type "N" to go back to the Create Volume menu. C-4