Firmly pull the stand from the bottom of the 3. TV. Place both the stand and bolts in a secure location for future reinstallation. ENGLISH FRANЗAISE ESPACOL Install the remote control 4.3 batteries For 32HFL3330D/27, security screws are provided to secure the LCDTV stand to the table top. A A A A A A Open the battery cover on the back of the 1. remote control. Insert the 2 batteries supplied. Make sure the 2. + and - ends of the batteries line up correctly. (inside of case is marked). Step 3 Connect cables Connect the antenna cable, AC power cord and all other devices to the back of the TV as described in the following sections and in Section 8 Connect devices. Close the cover. 3.
Connect the antenna or cable 4.4 This section describes how to connect your TV to an antenna, cable, Direct Broadcast Satellite, and to a cable receiver box. Step 4 Secure the VESA-compatible wall bracket to the TV Warning B B Only use the specified bolts (M6 x 10mm) to secure the VESA-compatible wall bracket to your TV. The specified bolts are designed to match the weight of your TV. CABLE HDMI 1 HDMI 2 / PC IN AV 1 Note D D Depending on your VESA-compatible wall bracket, you may need to separate the mounting plate from the wall bracket for easier installation. Refer to your VESA-compatible wall bracket documentation for instructions.
AV 2 75 Ω Connect to an antenna Any DTV programs that are broadcast in your area can be received for free through an antenna connection. EN-8