5. BEFORE YOU START 5.2. Initial Setup Please follow the instructions below to complete the initial setup. 5.1. Finding the Viewing Channel /Source on Your TV 1. While “On-Screen Language” screen is displayed, use [ K / L ] to select your language, then press [OK] . After you have completed all the connections, you must find the viewing channel (external input source) on your TV. 1. After you have made all the necessary connections, press [ B (standby/on)] to turn on the unit. On-screen Language English 2. Turn on your TV. Franзais Espacol 3. Press the button on the TV’s remote control that accesses the external input channel.
It may be labeled “SOURCE”, “AV”, “AUX” or “SELECT” (refer to your TV’s user manual). Or press “2” on the TV’s remote control, then press channel down button. Select the On-Screen Language. Sйlectionnez la langue d'affichage. Seleccione un Idooma para el menъ en pantalla que desee desplegar. • When this unit is connected to a 4K-compatible TV, the “4K/60p Output” screen will appear. Otherwise, move on to step 3. 2. Follow the on-screen instructions, and if the “Is this message displayed?” screen is displayed, select “Yes”, then press [OK] . Please wait. • If a confirmation screen* appears, select “Yes”, then press [OK] . * It takes some time until the confirmation screen appears.
This is the correct viewing channel (external input source). • If the TV is connected by an HDMI cable, it may take a while for the Philips splash screen to come up. 3. The “Quick start” screen will appear. Use [ K / L ] to select “On” or “Off”, then press [OK] . • If a certain amount of time has passed since you turned on the unit, welcome screen appears the first time you turn on this unit. In order to make the unit start faster, then set to "On". If done then this will increase the Power Consumption during Standby mode. “Off” will reduce the Power Consumption during Standby mode rather than “On”. 4. Press [OK] . • “Easy Settings” is finished. 5. “Easy Network Setting” screen will appear.
Use [ K / L ] to select the desired mode, then press [OK] . • If you select “Wired”, refer to “Wired” on page 43 for further operation. • If you select “Wireless”, refer to “Wireless” on page 45 for further operation. 6. The Home menu will appear. EN 19