Troubleshooting file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/SAFETY/saf_troub.htm (1 of 2)2006-08-04 11:01:16 AM • Safety and Troubleshooting • FAQs • Common Problems • Imaging Problems • Regulatory Information • Other Related Information s Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these olutions, contact Philips customer service representative. Common Problems Having this problem Check these items No Picture (Power LED not lit) G Make sure the power cord is plugged into the power outlet and into the back of the monitor.
G First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position. No Picture (Power LED is amber or yellow) G Make sure the computer is turned on. G Make sure the signal cable is properly connected to your computer. G Check to see if the monitor cable has bent pins. G The Energy Saving feature may be activated Screen says G Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick Set-Up Guide). G Check to see if the monitor cable has bent pins. G Make sure the computer is turned on.
AUTO button not working properly G The Auto Function is designed for use on standard Macintosh or IBM-compatible PCs running Microsoft Windows. G It may not work properly if using nonstandard PC or video card. Imaging Problems Display position is incorrect G Press the Auto button. G Adjust the image position using the Horizontal Position and/or Vertical Position in OSD Main Controls. Image vibrates on the screen G Check that the signal cable is properly connected to the graphics board or PC.