Placement WARNING! To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Suggested wall mounting height: ≤ 1.5 meters. You are recommended to install the TV first before wall mounting the soundbar. With a TV preinstalled, wall mount the soundbar 50mm/2.0’’ in distance from the bottom of the TV. For best results, place your Soundbar as shown below. template provided for helping the drilling holes position on the wall. 2 Secure the dowels and screws in the holes. Screw length/diameter 3.5-4mm/0.14 -0.16" » Be sure to leave a 3.5-4mm gap between the wall and the screw’s head.
3 Attach the wall brackets (x2) into on the unit. 4 Hang the soundbar on the fastening screws. 4mm/ 0.16" >32mm/1.26" 11 EN 1 ~50mm/2.0" 743mm / 29.2” 3.5-4mm/0.14 -0.16" 2 4mm/ 0.16" >32mm/1.26" 3 • Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. • Before wall mounting, make sure the wall can support the weight of your soundbar. • Before wall mount, you need not remove the rubber feet at the bottom of the soundbar, otherwise the rubber feet cannot be fixed back. • Depending on the type of wall mounting your soundbar, make sure that you use screws of a suitable length and diameter.
• Please check whether the USB port on the back of the soundbar is connected to a USB device. If it is found that the connected USB device afef cts the wall-mount, you need to use another USB device of the appropriate size. 4 1 Drill 2 parallel holes (Diameter 3-8mm each according to wall type) on the wall. » The distance between the holes are: 743mm / 29.2” » You can use the wall mount 4