Dynamic Range Control (DRC) » By default, the Bass/Treble is set to 0. You can apply dynamic range control to Dolby Digital tracks. ON : Optimization the dynamic range OFF : Turn off dynamic range adjustment AUTO : Dynamic range is automatically adjusted » By default, the DRC mode is set to AUTO. Dialogue mode Dialogue mode improves the clarity of dialogue and vocals in movies, TV programs and podcasts by adjusting the tonal balance of this product. DLG 0 ~ DLG 6 » By default, the dialogue mode is set to 0. IMAX Set IMAX mode auto or off. AUTO : Set to IMAX mode on OFF : Set to IMAX mode off » By default, the IMAX mode is set to AUTO. SYNC Set the audio delay.
Video image processing, sometimes longer than the time required to process the audio signal. This is called “delayed.” Audio Delay feature is designed to remedy this delay. Neural:X S 00~S 200 » By default, the audio delay is set to 00. DTS:X® technologies provide users with virtual multi-channel virtual surround effects, creating an immersive audio volume. ON : Set to Neural:X mode on OFF : Set to Neural:X mode off » By default, the Neural:X mode is set to ON. Calibration Auto calibration setup. BASS/TREBLE Change the low frequency (bass) and high frequency (treble) settings of this product. BAS -5 ~ BAS +5 TRE -5 ~ TRE +5 To start auto calibration: 1 Turn on the soundbar.
2 Insert MIC to MIC IN at the rear of FB1. 21 EN Tips • The related level value can be adjusted only when playing DTS format source. Otherwise it cannot be adjusted. Note • DRC is not available in USB/BT/Play-fi mode. Tips • If calibration is never done before, If MIC is inserted, navigate to the calibration item shall always display “CALIBRATE – PRESS PLAY”.