Adjust speaker level Standby Front Left : FL -5 ~ FL +5 Front Right : FR -5 ~ FR +5 Subwoofer : SW-5 ~ SW +5 Center : CT -5 ~ CT +5 Side Left : SL -5 ~ SL +5 Side Right : SR -5 ~ SR +5 » By default, the speaker level is set to 00. The unit automatically turns to Standby mode after about 15 minutes if the TV or the external unit is disconnected (or USB, BT function bit playback pause), switched off. STNBY IN 15M : Turn on the Auto-Standby. STNBY OFF : Turn off the Auto- Standby. » By default, the setting is set to off. DIM Set display brightness. DIM HIGH, DIM MID, DIM LOW » By default, the dimmer is set to DIM MID.
DISPLAY Set to turn off the display automatically (except the Wi-Fi LED indicator) after 10 seconds of idle when no user operation. ON : Set to display on OFF : Set to display off » By default, the display is set to ON. BT PAIR Enter the Bluetooth pairing mode. If you want to connect your soundbar with another Bluetooth device, you can activation the pairing in the menu ( BT PAIR ) to disconnect from current BT connected devices and enter the Bluetooth pairing mode. » Press > select “ BT PAIR ” > Then press (Enter) to confirm the Bluetooth pairing mode. Follow step 2-3 in “ Play from Bluetooth devices “ above to pair your Bluetooth device. LIGHT Audio light ring control. AUTO :
When the Dolby Atmos format is detected, the audio light ring will turn on for 10 seconds and turn off. ON : When Dolby Atmos format is detected, the halo light stays on following the audio. OFF : Set to Audio light ring off » By default, the LIGHT is set to AUTO. SUB PAIR FB1 soundbar can pair with FW1 (not supplied) Play-Fi wireless subwoofer. 23 EN Note • To switch the unit off completely, remove the mains plug from the mains socket. • Please turn the unit off completely to save energy when not in use. Tips • The “BT PAIR” menu will only be displayed when the current signal source is in “BT” mode Note • The brightness should follow DIM setting.