5 ( Standby-On ) button Connectors Power State Action Function This section includes an overview of the 6 Remote control sensor / Display panel 1 (Wi-Fi Setup) button Trigger Wi-Fi setup for Play-fi. Press and hold the button for 3 seconds to active the Wps mode. Press and hold the button for 8 seconds to active the AP mode. 7 Audio light ring (White) When the height channel (such as Dolby Atmos) audio output is detected, the audio light ring will turn on for 10 seconds and turn off. If you want the audio light ring to be ON or OFF, it can be defined by LIGHT ” in the setup menu. 2 Mic in Microphone input for auto room calibration. 3 IR out IR pass-through cable connector.
8 Power LED Turns white when in Eco standby (network disconnected). 4 USB Connect to a USB storage device for audio media play. Upgrade software of this product. 9 Wi-Fi LED indicator (Yellow) LED State Status 5 Optical Connect to an optical audio output on the TV or a digital device. 6 HDMI out (eARC/ARC) Socket Connect to the HDMI (eARC/ARC) input on the TV. Double blink Wi-Fi Protected Setup (WPS) mode 7 HDMI in Socket Connect to the HDMI source devices, such as a DVD player, Blu-ray Disc™ player, or gaming console. 8 AC Socket Connect to the power supply. 8 EN 9 Wall bracket slot On Follow source state Semi Press • Wi-Fi is connected.
Standby the • It supports Play-fi button and Airplay2 once Chromecast, Spotify connect, work with Alexa. Eco Press • Wi-Fi is off. 9 8 Mic in IR out Standby and hold • The product enters the lower power >2 seconds consumption mode. • Restarting the system will take a 1 2 3 4 5 6 7 relatively longer time. Blink Wi-Fi Access Point (AP) mode Constant on Connected / Pairing successful