Troubleshooting file:///D|/My%20Documents/dfu/190V6FB_V3/english/190v6/safety/saf_troub.htm (2 of 3)2005-12-22 7:03:21 PM The Auto Function is designed for use on G standard Macintosh or IBM-compatible PCs running Microsoft Windows. AUTO button not working properly It may not work properly if using G nonstandard PC or video card. Imaging Problems Press the Auto button. G Adjust the image position using the G Display position is incorrect Horizontal Position and/or Vertical Position in OSD Main Controls. Check that the signal cable is properly G Image vibrates on the screen connected to the graphics board or PC. Vertical flicker appears Press the Auto button.
G Eliminate the vertical bars using the G Phase/Clock of More Settings in OSD Main Controls. Horizontal flicker appears Press the Auto button. G Eliminate the vertical bars using the G Phase/Clock of More Settings in OSD Main Controls. Adjust the contrast and brightness on G OSD Main Controls. (The backlight of the LCD monitor has a fixed life span. When The screen is too bright or too dark the screen becomes dark or begins to flicker, please contact your dealer). If an image remains on the screen for an G extended period of time, it may be imprinted in the screen and leave an after- An after-image appears image. This usually disappears after a few hours