Connect to an antenna Connect a set-top box through RF IN/OUT Any DTV programs that are broadcast in your area can be received for free through an antenna connection. If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 or 4, or to the channel specifi ed by the service provider. English Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area. Broadcasters are transitioning from analog to digital TV. This means that a given broadcaster can have channels available either in analog or in digital, or both analog and digital at the same time.
32PFL3504D / 32PFL3514D The TV produces stereo sound only if a stereo signal is broadcast. Connect to a cable When your TV is connected to the cable socket, you might receive free digital and high defi nition programs (depending on your cable provider). The channel number for digital and high defi nition channels includes a dot “.” For example, 11.1, 46.30, 108.201. Contact your cable provider for more information. Connect to a Direct Broadcast Satellite (DBS) There are two main DBS systems: DirecTV and DishNetwork. These systems require a separate, proprietary set-top box to decode signals and send them to the TV.
The set-top box contains a digital TV tuner for receiving off-air digital broadcasts. 42PFL3704D Contact your local DBS provider for more information about the connections and the TV channels. Connect to a set-top box A cable box or satellite set-top box can be connected to the TV through the following connections: ANT A/V (Composite Video and Audio) S-Video YPbPr (Component Video Input) HDMI For information about how to connect a set-top box, see the Quick Start provided. EN 9