LIST OF SETTINGS 44 EN Category Menus / Options Description Advanced Setup Audio Night Mode Auto Compresses range between soft and loud sounds. “Auto”: Night Mode will be activated automatically when Dolby TrueHD audio is played back. “On”: Activates the Night Mode. “Off”: Deactivates the Night Mode. On Blu-ray Disc Audio Mix Audio Output Primary Audio Only “Mix Audio Output”: The audio for the secondary video and the interactive application will be output together with the audio for the primary video. “Primary Audio Only”: Only audio for the primary video will be output.
When playing back a BD-video which only contains primary audio, the audio output will be the same case as “Primary Audio Only” even if the “Blu-ray Disc Audio” is set to “Mix Audio Output”. Audio Output* • Refer to page 49 for more information. Speakers “Speakers” Audio will be output from the 5.1ch speakers. “HDMI Normal” The Multi-channel audio signals are output from HDMI OUT jack with Bitstream or LPCM depending on the material. “HDMI LPCM” The Multi-channel or stereo audio signals are output from HDMI OUT jack with LPCM. Speaker Setup • This feature is available only when “Audio Output” is set to “Speakers”.
(Refer to page 49.) Surround Effects • Sets the surround effect of audio when the setting of surround mode is set to “Dolby Pro Logic II Movie” or “Dolby Pro Logic II Music”. (Refer to “Selecting Surround Mode” on page 57.) Center Width 0 ~ 7 default is 3 Adjust the sound balance between center and front speakers. Dimension -3 ~ 3 default is 0 Adjust the sound balance between front and rear speakers. Panorama On Off “On” : Sets the sound of center speaker to have surround-sound effect. “Off” : Sets the sound of center speaker to normal. Speaker Distance Unit Feet Sets the unit of measure for “Speaker Distance”. Front (L/R) Feet : 0 ~ 15 Meters :
0 ~ 4.5 default is 3 Sets the distance from the listening point to each speaker to get the ideal delay time. • If you change the setting of “Front (L/R)”, the setting of “Center” and “Surround” will be set to the same setting automatically. • If you set “Front (L/R)” to 0 ft (0m), you can only select 0 ft (0m) for “Center” and “Surround”. • Difference of the values among “Front (L/R)” and “Center” cannot exceed 5 ft (1.5m). Center default is 3 Surround default is 3 Default Yes No Sets all speaker distance settings to the default setting. No