Topdon — Phoenix Elite User Manual

Q: There is no power in the MDCI dongle after connecting to the vehicle’s DLC port. A: EN Q: The tablet cannot establish a connection with the MDCI dongle. A: 43 Possible Cause Solution Poor contact of the MDCI dongle. Plug out the MDCI dongle, and then plug it in again. Poor contact of vehicle’s DLC port. Plug out the MDCI dongle, and then plug it in again. Too low voltage of the vehicle battery. • Recharge the vehicle battery. • Replace the vehicle battery if it is damaged. Fuse blown. Check the fuse of the OBD module. Possible Cause Solution Poor contact of the MDCI dongle. • Plug out the MDCI dongle, and then plug it in again. • Perform the MDCI Bluetooth pairing again.

The firmware is damaged. Enter the settings and tap “Fix MDCI Firmware/System” to fix the firmware.