06 Q Why is there is no power in the Phoenix MDCI dongle after connecting to the vehicle's OBD port. A Possible Cause: Poor contact between the MDCI dongle and port. Solution: Unplug the Phoenix MDCI dongle, and then plug it in again. Possible Cause: The vehicle's battery is too low. Solution: Recharge the car battery. Replace the battery if it's damaged. Possible Cause: There is a blown fuse. Solution: Check the fuse of the OBD module. Q The tablet cannot establish a connection with the Lite 2's MDCI dongle. A Possible Cause: Poor contact between the MDCI and OBD port. Solution: Unplug the MDCI dongle, and then plug it in again. Perform the MDCI Bluetooth pairing again.