Topdon — Phoenix Lite 2 User Manual

It needs to be performed in the following cases: • When the following functions disabled including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc. in order to reduce the power consumption. EN 3.20 A/F (A/F Reset) This function can set or learn Air/Fuel ratio parameters. 3.21 STOP/START (Stop/Start Reset) This function can open or close the automatic start-stop function via setting the hidden function in ECU (provided that the vehicle has a corresponding hidden function supported by hardware). 3.22 NOX (NOx Sensor Reset) This function can reset the catalytic converter learned value stored in the engine ECU.

It needs to be performed in the following cases: • When the NOx fault is re-initialized and the NOx catalytic converter is replaced. 3.23 ADBLUE (Diesel Engine Exhaust Gas Filter) After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required. 3.24 SEATS (Seat Calibration) 3.25 COOLANT (Coolant Bleeding) This function can match the seats with memory function that are replaced and repaired. This function can activate the electronic water pump before venting the cooling system. 3.26 TYPE (Tire Reset) 3.27 WINDOWS (Windows Calibration) This function can set the size parameters of the modified or replaced tire.

This feature can perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window. 3.28 LANGUAGE (Language Change) This function can change the system language of the vehicle central control panel. 29