Q: There is no power in the MDCI Lite dongle after connecting to the vehicle’s DLC port. A: Q: A: Q: Can I use other chargers to charge the tablet? A: No, please use the original charger provided by TOPDON. Any damage and economic loss caused by using the improper battery charger will not be our responsibility. Q: How to save the battery power? A: Please switch off the screen while the tablet is idle, or set a short standby time, or reduce the brightness of the screen. Q: Are there non-standard OBDII adapters in the box? A: Yes. 40 Possible Cause Solution Poor contact of the MDCI Lite dongle. Plug out the MDCI Lite dongle, and then plug it in again. Poor contact of vehicle’s DLC port.
Plug out the MDCI Lite dongle, and then plug it in again. Too low voltage of the vehicle battery. • Recharge the vehicle battery. • Replace the vehicle battery if it is damaged. Fuse blown. Check the fuse of the OBD module. he tablet cannot establish a connection with the MDCI Lite dongle. Possible Cause Solution Check the fuse onnection with the MDCI Lite do Solution Poor contact of the MDCI Lite dongle. ite dongle. • Plug out t then plug • Perform t pairing a The firmware is damaged. Enter the settings and tap “Fix MDCI Firmware/System” to fix the firmware.