Polaris Phoenix 200 — Polaris Phoenix 200 Owner's Manual & Service Guide PDF

MAINTENANCE Rear Gearcase Oil Always check and change the rear gearcase oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 52. Maintain the oil level at the bottom of the check plug hole. We recom- mend the use of POLARIS ATV Angle Drive Fluid. Use of other oils may result in improper operation of components. See page 98 for the part numbers of POLARIS products. Rear Gearcase Oil Recommendations Oil Check 1. Position the vehicle on a level surface. 2. Remove the check plug and view the oil level. 3. Remove the fill plug. Add the recommended oil as needed. 4. Reinstall the fill plug. Torque to specification. 5. Reinstall the check plug. Torque to specification.

6. Check for leaks. Oil Change 1. Remove the skid plate. 2. Remove the drain plug. Drain the oil into an appropriate container. Discard used oil properly. 3. Clean and reinstall the drain plug with a new sealing washer. Torque to specification. 4. Remove the fill plug and add the recommended gearcase oil. 5. Reinstall the fill plug. Torque to specification. 6. Check for leaks. 7. Reinstall the skid plate. Check Plug Fill Plug 61 Gearcase Lubricant Capacity Fill Plug Torque Drain/Check Plug Torque Rear Gearcase ATV Angle Drive Fluid 4 oz. (120 ml) 25 ft. lbs. (34 Nm) 18 ft. lbs. (24 Nm)