Polaris Phoenix 200 — Polaris Phoenix 200 Owner's Manual & Service Guide PDF

MAINTENANCE Spark Plugs Spark Plug Recommendations Refer to the specifications section beginning on page 96 for the recom- mended spark plug type and gap for your vehicle. Torque spark plugs to specification. NOTICE: Using non-recommended spark plugs can result in serious engine damage. Always use POLARIS-recommended spark plugs. Spark Plug Inspection Spark plug condition is indicative of engine operation. Check the spark plug firing end condition after the engine has been warmed up and the vehicle has been driven at higher speeds. Immediately check the spark plug for correct color. See page 71. CAUTION! A hot exhaust system and engine can cause burns.

Wear protective gloves when removing a spark plug for inspection. 1. Remove the spark plug cap. 2. Using the special wrench provided in the tool pouch, rotate the spark plug counterclockwise to remove it. 3. Reverse the procedure for spark plug installation. Torque to specification. Spark Plug Cap 70 Plug Condition Torque Specification New Spark Plug 9-11 ft. lbs. (12-15 Nm) Previously Installed Spark Plug 17-20 ft. lbs. (23-27 Nm)