ADJUSTMENTS Speed Control System Throttle Stop Speed Control System The speed control system has two options for limiting speed. Adjusting the speed limit screw allows you to control vehicle speed between 0 and 30 MPH (48 km/h). This adjustment con- trols how far the throttle opens. To remove the speed limiting entirely and allow operation up to the maximum vehicle speed of 38 MPH (61 km/h), the speed limit bracket can be removed. 1. To adjust the speed limit screw, loosen the jam nut. 2. Turn the screw inward to reduce the speed. Turn the screw outward to increase speed up to the 30 MPH (48 km/h) maximum.
The throt- tle lever will stop against the speed control bracket at the maximum setting. 3. Tighten the jam nut after adjusting. 4. To allow the vehicle to operate to the maximum of 38 MPH (61 km/h), remove the bracket fastener on the throttle assembly and remove the bracket. Bottom Views of Throttle Assembly Adjusted Below Maximum Limiting Screw Jam Nut Adjusted at Maximum Bracket Fastener Bracket Removed 91