Phoenix Model 8612 minimum of 24 gauge sheet metal or a minimum of 4” (102 mm) of masonry, both with a 1” (25mm) air space between the wall and the masonry or sheet metal. Refer to NFPA 211 for a complete list of non-combustible wall configurations. Using Single Wall Stove Pipe without Heat Shield Maintain 18” min. clearance between horizontal chimney connector and ceiling. Parallel Installation: A: Side walls to stove: 20” (51 cm) B: Back wall to stove: 25” (64 cm) Residential and Mobile Home Installations for USA/Canada – Rear Exit Using Close Clearance Connector Pipe with Heat Shield Residential and Mobile Home Installations for USA/Canada – Rear Exit Parallel Installation: A:
Side walls to stove: 16” (41 cm) B: Back wall to stove: 13” (33 cm) Alcove Installation Using Close Clearance Connector Pipe and Rear Heat Shield Residential and Mobile Home Installations for USA/Canada Alcove Installation Using Close Clearance Connector Pipe and Rear Heat Shield with NFPA 211 Protection. Residential and Mobile Home Installations for USA/Canada A: Side walls to stove: 8” (20 cm) B: Back wall to stove: 9” (23 cm) C: Back wall to pipe: 5” (13 cm) D: Top of stove to ceiling: 36” (91 cm) The minimum alcove size: Height: 64” (163 cm) Width: 40” (102 cm) Max. Depth: 48” (122 cm) Hearthstone Quality Home Heating Products, Inc ® www.hearthstonestoves.com 11 Height:
68” (173 cm) Width: 60” (152 cm)