* Grasp the push bar and pull up while holding down on the seat to expand the chair, as P.4 * When the wheelchair is fully deployed, and the yellow stick at the back of the cushion frame is in the horizontal state, You will hear "click" at the same time that is mean "unfolding "is finished, as P.5 * Put the cushion on the wheelchair,as P.6 P.8 * Remove seat cushion * Lift up the yellow stick , At the same time Bend the handrail until it close to the seat frame. P.7 * Lift up the wheelchair P.8 5. Install the controller into the open slot on the arm of the chair, on the right side (if user needed, can change to left side).
Tighten knob located under the armrest to secure the controller in place. 10